IC-A22
Super Compact NAV and COM portable


This extra compact aviation transceiver features excellent audio quality on the COM side and a VOR receiver with CDI function on the NAV side. Check and compare the dimensions of the IC-A22/E with other so-called "portable" transceivers. 
 


Navigation features

  • Displays the radial heading TO or FROM the VOR station
  • CDI (Course Deviation Indicator) shows deviation from original set course at a glance
  • All 200 navigation channels
  • ABSS (Automatic Bearing Set System ) identifies the direct radial to the VOR
  • Semi-duplex function allows you to contact flight services, etc. while receiving VOR signals (U.S.A. version only)
Compact size with superior audio
Compared to previous portable air band transceivers, the IC-A22/E truly is portable. However, the audio is not compromised __ superior audio output that's easy to hear even without a headset.
Ergonomic keypad design provides convenient access to all functions and a rotary control allows quick and easy tuning of all frequency and memory channels.

Alphanumeric display
The IC-A22/E's function display features alphanumeric characters which allow you to store VOR ID's, airport ID's, etc. into memory for easy recall and quick visual recognition.

Built-in sidetone function
The sidetone function allows you to monitor your transmitted audio while using a headset. An aircraft headset adapter is supplied* with the IC-A22/E for this purpose as standard equipment.
*Not supplied with some versions.

And more...
  • 50 memories with alphanumeric message capabilities
  • One-touch selection of the 121.5 MHz emergency frequency
  • Versatile scanning capabilities including a lockout function
  • Receives all VHF FM marine weather channels (U.S.A. version only)
  • DC connector allows operation with a 12 to 15 V DC power source
  • Powerful 5 W of output power (5 W P.E.P. typ., 1.5 W carrier typ.)
  • FET power module provides stable operation at high duty cycles
  • Rugged die-cast aluminum chassis and polycarbonate casing for extraordinarily rugged use
  • ANL (automatic noise limiter) function to reduce pulse-type noise
  • Low battery indicator and over voltage caution indicator
  • Accessories packed with the transceiver: Ni-Cd battery*, wall charger*, headset adapter*, belt clip, flexible antenna and carrying case*.
*Not supplied with some versions.
 
* depending on version
  • Battery Pack*
  • Wall Charger*
  • Belt Clip
  • Hand strap
  • Antenna
 
  • CM-166 Ni-Cd BATTERY PACK
    12 V, 600 mAh rechargeable battery pack provides 5 hours of operation (at a duty cycle of 5 : 5 : 90/Tx : Rx : standby), The same as supplied with the transceiver (not supplied with some versions).
  • CM-167 BATTERY CASE for R6 (AA) size × 10 alkaline batteries.
  • BC-119 DESKTOP CHARGER
    +AD-50 DESKTOP CHARGER ADAPTER +AD-75 CONNECTION BOARD
    For rapid charging of a battery pack. An AC adapter and the AD-75 may be supplied with the charger. Charging time: 1 to 1.5 hrs.
  • BC-121 MULTI-CHARGER
    +AD-50 DESKTOP CHARGER ADAPTER +AD-75 CONNECTION BOARD
    For rapid charging up to 6 batteries simultaneously. An AC adapter may be supplied depending on version. Six AD-50's are necessary. Charging time: 1 to 1.5 hrs.
  • BM-112U/E WALL CHARGER,
    Regularly charges the CM-166 in approx. 15 hrs. Similar to the one supplied with the transceiver.
  • CP-17L ClGARETTE LIGHTER CABLE
    For operation with a 12 V cigarette lighter socket.
  • OPC-515L DC POWER CABLE
    For operation and charging from a 12-15 V DC power supply.
  • HM-112 SPEAKER-MICROPHONE
    Provides convenient lightweight operation while setting the transceiver in the cockpit or hanging it from your belt, etc.
  • LC-122 CARRYING CASE
    Fits the transceiver with the supplied CM-1 66.
  • MB-25 MOUNTING BRACKET
    Hang the transceiver via belt clip to a flat surface inside an aircraft.
  • OPC-499 HEADSET ADAPTER CABLE
    Allows you to work with most aviation headsets. Provides the side tone function. Some versions already contain this as an accessory.
  • BC-124 AC ADAPTER
    Used for BC-121. Output voltage/current: 12 V/7 A
 

  Please Click for Product Brochures